Product information/description
Spectra™ pre-finished steel, a smart solution that provides consistent performance economically in wide variety of exterior decking or interior ceiling and paneling application.
Spectra™ is developed with comprehensive color selections to accommodate variety of creative ideas and distinct uniqueness in building designs.
With the new and promising warranty that last up to 15 years*, Spectra™ is made in compliance with the current stringent requirements in the building materials specification.
– Excellent performance system developed from superior polyester paint formula
– Optimized ZINCCOAT Zinc metallic substrate for ultimate corrosion resistance and cut-edge protection.
– Excellent color and gloss retention.
– Excellent bending ability for all profiles.
– Wide range of aesthetic colours and customization
– Up to 15 years warranty.*
*Warranty subject to terms and condition.
Product Specification
BMT |
0.30 – 1.00mm |
Width |
914/1219mm |
Paint Film Thickness:
Finish Coat |
1525 µm max |
Backing Coat |
5 10 µm max |
Primer Coat |
Corrosive inhibitive primer coating 5 7 µm max on both side |
Conversion Coat |
Chemical treatment for extensive corrosion resistant |
Zinc Coating Mass |
Z12 – Z27 |
Steel Grade |
JIS G3312 |
Steel Mechanical Properties
Full Hard Material (CGCH) |
|
– Tensile Strength, Mpa |
580 – 740 |
– Yield Strength, Mpa |
550 – 700 |
– Hardness. HRB |
85 – 99 |
– Elongation, % |
1 – 6 |
Soft Material (CGCC) |
|
– Tensile Strength, Mpa |
280 – 400 |
– Yield Strength, Mpa |
250 – 380 |
– Hardness. HRB |
55 – 65 |
– Elongation, % |
21 – 31 |
Typical Properties
Property |
Test Method |
Gloss Gardner 60 |
Nominal ± 10 units |
Pencil Hardness |
H minimum |
Bending |
4T maximum |
Impact Resistance |
10 joule minimum |
Corrosion Resistance |
500 hours ; blisters and loss of adhesion less than 3mm from scribe |